D-Link DWC-2000, Справочное руководство CLI

Страница: 38 / 113

36
8 debug
Enable/Disable debugging
on Managed AP.
9 debug passwd
Enter the admin password
for the AP (the default is
admin.
String
10
debug
passwd_confirm Enter the admin password
again.
String
11
debug
enable_debug Enable/Disable debugging
on Managed AP.
Boolean choice
12 reset Reset a WS managed AP.
Boolean choice
2.2 wlan ap_management ap_database add <macaddr>
S.No Command Name Description Type and Description
1 <macaddr>
wlan ap-management ap-
database configuration
mode.
MAC address AA:BB:CC:DD:EE:FF
where each part is in the range 00-
FF
2 save
Save ap-database
configuration changes.
3 cancel
Roll back ap-database
configuration changes.
4 exit
Save ap-database
configuration changes and
current mode.
5 mode
Configure the AP Managed
mode.
AP mode
6 location
Configure the AP location
description.
String
7 password
Configure the AP
Authentication Password.
String
8 profileid <1-16>
Set the AP Profile ID to use
for configuration.
AP Profile ID
9 ssid
Configure the stand-alone
AP expected SSID.
String
10 channel
Configure the stand-alone
AP expected channel.
Unsigned integer
11 wds_mode
Configure the stand-alone
AP expected WDS mode.
Stand-alone AP expected WDS
mode
12 security_mode
Configure the stand-alone
AP expected security
mode.
Stand Alone AP Security mode
13 wired-mode Configure the stand-alone