19
The command
“
show POP3-Settings ?
”
at the CLI prompt, gives a
description of all the show commands in the branch POP3-Settings , these are
as follows:
1 show POP3-Settings
Display POP3 configuration.
The command
“
show POP3-Trusted-CA ?
”
at the CLI prompt, gives a
description of all the show commands in the branch POP3-Trusted-CA , these
are as follows:
1 show POP3-Trusted-CA Display POP3 Trusted Certificates.
The command
“
show system ?
”
at the CLI prompt, gives a description of all
the show commands in the branch system , these are as follows:
1 show system logging
Display Logging
Configuration.
2 show system logging remote
.
3 show system logging remote setup
Display remote logging
configuration.
4 show system logging facility
.
5
show system logging facility
setup
<facility>
Display logging facility
configuration.
6 show system logging ipv4
.
7 show system logging ipv4 setup
Display logging
configuration.
8 show system logging ipv6
.
9 show system logging ipv6 setup
Display ipv6 logs
configuration.
10
show system
remote_management
Display Remote
management
configuration.
11
show system
remote_management setup
Display remote
management over
https configuration.
12 show system snmp
<agentIP>
Display SNMP
configuration.
13 show system status
Display system status.
14 show system dashboard
Displays the resources
being used in the
system currently.
15 show system time
Display TimeZone
Configuration.
