D-Link DSL-200, Руководство пользователя

Страница: 39 / 50

DSL-200 ADSL USB Modem User’s Guide
33
Windows 98 / Windows Me (LAN Driver)
Follow these steps if you are using the RFC 1483 or RFC 1577 protocol on a computer running
Windows 98 or Windows Me.
1.
From the Start menu, select Settings, Control Panel, and then double-click on the Network icon.
2. The Network window appears. Select the Configuration tab, scroll down the installed network
components list and click on TCP/IP
 D-Link DSL-200 USB ADSL Modem.
3. Click the Properties button.
4. The TCP/IP Properties window will appear. Select the IP Address tab and then select the Select
an IP address option. Enter the IP Address and Subnet Mask settings given to you by your ISP
or ADSL service provider.
5. Select the Gateway tab and enter the IP settings in the new gateway field. Click Add.
Select the DNS Configuration tab.
Select the Enable DNS option.
Type in your host name in the Host: field.
Type in your domain name in the Domain: field.
Enter the DNS settings in the DNS Server Search Order field and click Add. If you have more
than one DNS IP address, repeat this step. You can have up to 3 DNS servers listed
here.
6. After all the TCP/IP information has been entered, click OK.
7. The Network window again appears, click OK.
The System Settings Change window appears. You need to restart your computer for the
changes to go into effect. Click Yes.
Windows 2000 / Windows XP / Windows XP 64-bit (LAN Driver)
1. Double-click on the My Computer icon, then the Control Panel icon, and then the Network and
Dial-up Connections icon.
2. The Network and Dial-up Connections window appears. Right click on the Local Area
Connection for the D-Link DSL-200 USB ADSL Modem.
3. The Local Area Connection window appears. Click on Internet Protocol (TCP/IP), then click on
Properties.
4. The Internet Protocol (TCP/IP) window appears. Under the General tab, select Use the
following IP address. Enter the IP address, Subnet Mask, and Default Gateway given to you by
your ISP or ADSL service provider. Click OK.
5. The General tab will again appear. Click OK.
6. The Network and Dial-up Connection window appears. Close this window to complete the
connection.