D-Link DSL-200, Руководство пользователя

Страница: 31 / 50

DSL-200 ADSL USB Modem User’s Guide
25
6) In the Communication Settings window you must provide the PVC settings, Encapsulation method
and Modulation method for configuring the Modem. Type in the VPI and VCI values in their respective
fields.
7) In the same window, select the appropriate
Encapsulation method from the drop-down menu. You will
select the encapsulation setting that is appropriate for the driver you are installing.
For RFC 2516 PPPoE, select RFC 2516 PPPoE Encapsulation. If you using RFC 2364 PPPoATM and
your service provider have not specified an encapsulation setting, use RFC 2364 PPPoATM NULL
Encapsulation.
If you are using the LAN driver, select the appropriate RFC 1483 encapsulation setting. If your service
provider has not specified an encapsulation setting, use RFC 1483 IPoATM Bridged LLC
Encapsulation.
8) Again in the same window, select the proper Modulation settings using the drop-down menu. Your
service provider will give you the appropriate Modulation settings. Choose T1.413, Multimode, G.Lite or
G.DMT. If your service provider has not specified a modulation setting, use Multimode. Click
Next to
continue.
At this point you must choose the Encapsulation method and
Modulation technique used for your ADSL connection. Be sure to
have the correct information available.
Enter your VPI and VCI .
Select your Encapsulation .
Select your Modulation .
Click Next