DHCP, DNS and Time
Dlink DRO-220i User Guide
20
Channel Type
Choose either B1 or B2 as channel type
Secure
When ON is selected the Dialin connections are accepted only from the
phone numbers added in the Dialin User Accounts Page. If OFF is
selected then Dialin connections will be accepted from any phone
number.
Local IP
Enter the IP address to be assigned for the Dialin connection one at end. It
is in the form of four IP octets separated by a dot (x.x.x.x).
Unnumbered
This interface can be configured as an unnumbered interface.
Subnet Mask
Enter the subnet mask in dotted decimal (i.e. A.B.C.D) format.
Remote IP
Enter the IP address to be assigned to the remote end for the Dialin
connection. It is in the form of four IP octets separated by a dot (x.x.x.x).
Authentication
Type
Select the PAP or CHAP depending on what the other end is using. Try
PAP/CHAP only when user is not sure what the other end is using.
Idle Timeout
If there is no activity on the line the connection gets disconnected after the
time entered in this field in seconds.
User Account
Select
Interface
→
WAN2
→
Dial up
→
Dial in
→
User Account
to configure the User
Account for Dialin connections.
User Account Settings for WAN2 Interface
User Name
Enter the user name to be given to Dialin user. It can be 20 characters
long.
Password
Enter the password to be given to the Dialin user. It can be 20 characters
long.
Phone number
Enter the phone number of the Dialin user including area code, for e.g. if
the Dialin user area code is 080 and phone number is 26788345 then enter
08026788345 in this field. This number is used to allow Dialin connection,
in case the SECURE option on this page is set to ON.
Channel Type
User can select channel type in this page so that he can restrict some user
dialing on particular channel. If he selects channel1 then username and
password will be allowed on that channel only.
If user has selected connection type 128K dialin / dialout then he can
enter a user account on channel1.
If user has selected connection type 6464kdialout then user
should enter a user account on channel2.
If user has selected connection type 2-64kdialin then he can enter two
different phone numbers on two channels.
Web UI
