DPN-1021G
GPON ONT VoIP Gateway with 1 GPON
Port, 1 10/100/1000Base-T Port, 1 10/100Base-TX Port,
and 1 FXS Port
User Manual
Configuring via Web-based Interface
Creating PPPoE WAN Connection
To create a connection of the PPPoE type,
click the
Add
button on the
Connections Setup /
WAN
page in the
Connections List
section. On the opened page, go to the
All Settings
tab.
Then select the relevant value from the
Connection Type
drop-down list and specify the needed
values.
Figure 32. The page for creating a new
PPPoE
connection. Selecting a connection type.
Parameter
Description
Enable connection
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Connection name
A name for the connection for easier identification.
Page
45
of 145
