DPN-1021G
GPON ONT VoIP Gateway with 1 GPON
Port, 1 10/100/1000Base-T Port, 1 10/100Base-TX Port,
and 1 FXS Port
User Manual
Configuring via Web-based Interface
Parameter
Description
Disable Hot Line
Disables the hotline.
Enable Hot Line
Enables the hotline.
Enable alarm clock
Enables the alarm clock for the time specified for this
line.
Disable alarm clock
Disables the alarm clock.
To change parameters of a code, select the relevant line in the table.
Figure 81. The
VoIP / Call Feature Codes
page. The window for editing the code parameters.
In the opened window, specify the needed parameters:
Parameter
Description
VSC
The value of the code. If the code ends with
*
(the asterisk key),
further you can enter a value for the function in use (a number for
call forwarding or time for the alarm clock). For example, the code
for enabling the alarm clock:
*55*HHMM#
, where
HHMM
is time
in 24-hour format.
Edit from Phone
Line 1
Move the switch to the right to enable the code for the phone
connected to the FXS port of the gateway.
Move the switch to the left to disable the code for this phone.
Sending to server
Line 1
Move the switch to the right to inform the SIP server when a user
dials the code on the phone.
Move the switch to the left if the server should not be informed.
Click the
SAVE
button.
When all needed settings are configured, click the
APPLY
button.
Page
111
of 145
