Receiving a Call : PSTN or VoIP
When an incoming PSTN or VoIP telephone call is detected, the handset will ring
and the L1 icon will be displayed in the LCD. If the caller can be identified, the
caller’s number or ContactList entry will be displayed. If the caller’s telephone
number is currently stored in the handset’s phone book, the caller’s name will be
displayed along with the telephone number.
To answer the call, simply pick the handset up from the charger base and press the
PSTN Dial Tone button.
To end the call, either press the On Hook button or replace the handset on the
charger base.
Incoming
Call
LED
This red LED
will flash to
indicate an
incoming
PSTN or VoIP
telephone call
IP
Press this
button to
answer an
incoming
VoIP
telephone call.
PSTN
Dial
Tone
Press this button to dial a
telephone number (over
the regular telephone line
(PSTN)). You will hear
the familiar dial tone
−
and then the handset will
dial the telephone
number as
you entered it.
On
Hook
Press this
button to end
a telephone
call. You can
also simply
place the
handset in the
charger base
to end any
telephone call.
This will end
both a PSTN
and a VoIP
telephone call.
Making Phone Calls
DPH-300 User’s Manual
60
D-Link Corporation
