** BATTERY CHARGING NOTE **
Before you connect your DPH-300 to the Internet, your network, or your PC, you should install
the batteries in the handset and place it on the base station for charging. The batteries need
to be
charged for at least 12 hours
before the first time you use the DPH-300.
1. Install the batteries.
2. Plug in the A/C adapter.
3. Put the handset on the base station
4.
Wait
12
hours.
IMPORTANT BATTERY SAFETY INSTRUCTIONS
CAUTION:
TO REDUCE THE RISK OF FIRE OR INJURY CAUSED BY THE
BATTERIES, READ AND FOLLOW THESE INSTRUCTIONS.
1.
Use Only AAA, 1.2V 600mAh Ni-MH
(Nickel Metal Hydride)
batteries
supplied by D-Link or D-Link Authorized Distributors.
2.
Contact D-Link to purchase replacement batteries if needed.
3.
Do not mix old and new batteries in this product.
4.
Do not mix different battery types or batteries from different manufacturers in
this product.
5.
Batteries are intended to be charged while in the handset. Charging with other
chargers or in any other manner may cause the batteries to explode.
6.
Do not dispose of the batteries in a fire. The batteries may explode. Check
with local codes for possible special disposal instructions.
7.
Do not open or mutilate the batteries. Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be toxic if swallowed.
8.
Exercise care in handling the batteries in order not to short them with conducting
materials such as rings, bracelets, keys, or tools. The battery or conductor may
overheat and cause burns.
9.
Observe proper polarity orientation between the batteries and the battery
receptacle of the handset.
10.
Be aware that NiMH batteries, regardless of their apparent charge state, may be
capable of producing electrical current sufficient to cause injury and property
damage.
11.
Never expose NiMH batteries to temperatures above 50 °C.
Statement of Liability
D-Link Corporation / D-Link Systems, Inc. does NOT assume any liability for death,
injury or damage to equipment or property resulting from the use of this phone in a
manner inconsistent with the use for which it was intended. D-Link Corporation / D-
Link Systems, Inc, will not be liable for consequences that may result from tampering
with the batteries or charger-base or consequences resulting from their use thereafter.
4