D-Link DPH-150S, Быстрое руководство по установке

Страница: 45 / 68

45
/ 68
Dial Peer
Field Name Explanation
Number
There are two types of matching conditions: one is full matching, the other
is prefix matching. In the Full matching, you need input your desired phone
number in this blank, and then you need dial the phone number to realize
calling to what the phone number is mapped. In the prefix matching, you
need input your desired prefix number and T; then dial the prefix and a
phone number to realize calling to what your prefix number is mapped. The
prefix number supports at most 30 digits.
Destination
Set Destination address. This is optional config item. If you want to set peer
to peer call, please input destination IP address or domain name. If you want
to use this dial rule on SIP2 line, you need input 255.255.255.255 or 0.0.0.2
in it.SIP3 into 0.0.0.3
Port Set the Signal port, the default is 5060 for SIP.
Alias
Set alias. This is optional config item. If you don’t set Alias, it will show no
alias.
Note: There are four types of aliases. 1) Add: xxx, it means that you need dial xxx in front of phone
number, which will reduce dialing number length. 2) All: xxx, it means that xxx will replace some
phone number. 3) Del: It means that phone will delete the number with length appointed. 4) Rep: It
means that phone will replace the number with length and number appointed. You can refer to the
following examples of different alias application to know more how to use different aliases and this
dial rule.