D-Link DPH-150S, Быстрое руководство по установке

Страница: 48 / 68

48
/ 68
Send after
(3-30)seconds
Set the timeout of the last dial digit. The call will be sent after timeout.
Press # to Do Blind
Transfer
Enable Blind Transfer On Hook, when executing Blind Transfer End with
#, press # after inputting the number that you want to transfer, the phone
will transfer the current call to the third party.
Blind Transfer on
OnHook
Enable Blind Transfer on On Hook, when executing Blind Transfer, hang
up after inputting the number that you want to transfer, the phone will
transfer the current call to the third party.
Attend Transfer on
OnHook
Enable Attend Transfer on On Hook, when executing Attended Transfer,
hang up after the third party answers, the phone will transfer the current
call to the third party.
Attended Transfer on
Conference Onhook Attended Transfer on Conference Onhook - Hang up during a 3-way
conference call, the other two ways will make a call.
Press DSS Key to Do
Blind Transfer Press DSS Key to Do Blind Transfer – When user is in the ‘XFER’
screen, user can fulfill Blind Transfer by pressing DSS Key.
Dial Plan Table
Below is user-defined digital map rule:
[] Specifies a range that will match digit. May be a range, a list of ranges separated by commas, or a
list of digits.
* Match any single digit that is dialed.
. Match any arbitrary number of digits including none.
Tn Indicates an additional time out period before digits are sent of n seconds in length. n is mandatory
and can have a value of 0 to 9 seconds. Tn must be the last 2 characters of a dial plan. If Tn is not
specified it is assumed to be T0 by default on all dial plans.
Cause extensions 1000-8999 to be dialed immediately.
Cause 8 digit numbers started with 9 to be dialed immediately.
Cause 911 to be dialed immediately after it is entered.
Cause 99 to be dialed after 4 seconds.
Cause any number started with 9911 to be dialed 4 seconds after dialing ceases.
Notice: End with “#”, Fixed Length, Time out and Digital Map Table can be