D-Link DPH-150S Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 68

background image

19

/ 68

description for each function. The default configuration for each key is N/A which means
the key hasn’t been set for any functions.

1. Set the type as Memory Key

Press Menu->Settings->Basic Settings->Enter->Keyboard->DSS Key Settings, you have
two options: Line Key Settings and Function Key Settings, choose one you want to make
the assignment, use the navigation key to choose the type as memory key. In the Dial field,
you have some options, such as Normal, Speed Dial, Intercom, BLF, Presence, and MWI.

Speed dial

You can configure the key as a simplified speed dial key. This key function allows you to
easily access your most dialed numbers.

Intercom

You can configure the key for Intercom code and it is useful in an office environment as a
quick access to connect to the operator or the secretary.

BLF

BLF is also called “Busy lamp field”, and it is used to prompt the user to pay attention to the
state of the object than has been subscribed, and used to cooperate with the server to pick up
the phone call. You can configure the key for Busy Lamp Field (BLF) which allows you to
monitor the status (idle, ringing, or busy) of other SIP account. User can dial out on a BLF
configured key. Please refer to “LED Instruction” for more detail about the LED status in
different situation. Note: In the Web interface, you can also set the pickup number to active
the pickup function. For example, if you set the BLF number as 212, and the pickup number
is 189, then when there is an incoming call to 212, press the BLF key, it will call out the 189
automatically to pick up the incoming call on 212.

Presence

Presence is called present, and compared to the BLF, it can also check whether object online.
Note: You can subscribe the BLF and presence station of the same number at the same time.

MWI

When the key is configured as MWI, you are allowed to access voicemail quickly by
pressing this key.

2. Set the type as Line

You can set these keys as line keys, and press it, it will enter dialer interface.

3. Set the type as Key Event

You can set these keys as Key Event, and the subtype have many options. Choose one and it
will have corresponding function.



None



MWI



DND

«
...
17
18
19
20
21
...
»

Содержание DPH-150S





































































Отзывы:

Нет отзывов

Похожие инструкции для DPH-150S

Бренд: NEC Страницы: 19

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 4

Бренд: NEC Страницы: 2

Бренд: Warner Telecom Group Страницы: 6

Бренд: AU Страницы: 3

Бренд: Barracuda Страницы: 4

Бренд: NTT docomo Страницы: 68

Бренд: Sony Ericsson Страницы: 113

Бренд: Avaya Страницы: 4

Бренд: Alcatel Страницы: 2

Бренд: Avaya Страницы: 172

Бренд: SoftBank Страницы: 2

Бренд: Samsung Страницы: 165

Бренд: Zte Страницы: 156

Бренд: Zte Страницы: 36

Бренд: Motorola Страницы: 256

Бренд: Zte Страницы: 167

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды