78
D-Link DNR-2060-08P User Manual
Section 4: Advanced Configuration
To Power On the Unit:
Check the type of power source before plugging in the power cord to the NVR (the acceptable
power input is between AC110V~AC240V), and power on the unit using the power key on
the front panel.
The color bar and system checking information will be shown on the monitor and then
disappear when the unit has been completely powered up.
To Restart / Shutdown the Unit:
Press
MENU
and input the username and password to access the OSD setup menu. Select
Shutdown
in Main Menu and press
ENTER
to enter the Shutdown menu.
Power Off
Select this item to shut down the unit. Do not remove the power during shut down until the
message
You can safely turn off NVR now!
displays.
Reboot
Select this item to reboot the unit. The color bar and system checking information are displayed
on the monitor until the unit is completely restarted.
Power Key Privilege
This option allows users to define quick shutdown actions following a long press of the
Power key.
Auth
will require login of authorized account when enabled,
Confirm
will require
confirmation before quick shutdown,
Direct
will directly shutdown the NVR, and
Disable
will
disable quick shutdown function.
Auto Rebooting
The NVR can be set to reboot automatically once a day/week at predetermined time for routine
maitainence. Select
Off
to disable the auto rebooting function
Rebooting Time
If the auto rebooting function is enabled, select a desired time to perform the auto rebooting
function.
