54
D-Link DNR-2060-08P User Manual
Section 4: Advanced Configuration
Preset Record Configuration
Per Camera Configuration
Record Event Video Only
The
Preset Config
is used to select the preset recording quality and frame rate. In normal
circumstances, it is strongly recommended to set the preset configuration as
Best Quality
.
This function is used to set the Day/Night/Weekend PPS (Picture per Second) and Quality for
each channel. The Preset Configuration must be set to
OFF
for accessing these schedules.
First, select the Camera required for configuration. The image and recording settings from the
selected camera will be shown on the screen.
Move the cursor using Direction keys and press
ENTER
to select an item.
Change the value using
UP
/
DOWN
keys.
Press
ENTER
to confirm the settings or
ESC
to abort.
Press
ESC
to return to Record setup menu.
If the NVR is required to record only in response to a trigger, follow the steps below:
Enter the OSD setup menu with an account with appropriate authority.
In the OSD setup menu, select Record menu. Move the cursor to the item
Preset Config
, and
select
Event only
.
Refer to "Preset Record Configuration" on page 54, Section Preset Record Configuration for
further information.
