15
D-Link DNR-2060-08P User Manual
Section 2: System Setup
USB Mouse Operation
Users can attach a USB mouse to control the NVR. To use a USB mouse, plug a USB mouse into
any USB port of the NVR.
Move the cursor to the right side of the screen and a Live Panel will be displayed. The icons on
the Live Panel are the same as the function keys on the front panel of the NVR.
Clicking the left button operates the same as pressing the
ENTER
key. Clicking the right
button operates the same as pressing the
ESC
key. The scroll wheel is used to change values.
For example, if users want to change dome camera ID, enter the OSD setup menu with an
authorized account and go to the following path:
Camera,
Connection Setup
,
IP
Dome ID
.
Left click on
IP Dome ID
and scroll the mouse wheel up or down, the ID number will change as
the scroll wheel moves. Stop moving the scroll wheel when the preferred ID number appears,
then left click on the
IP Dome ID
to select the ID Number and the ID number will be changed.
Camera Title Alignment
Users can change the display position of camera titles of all channels. To change the camera
title position for a single channel, left click on the camera title and drag the title to a preferred
position. If users want to set all of the camera titles to the same position that is set for a specific
channel, right click on the specific camera title and select Align Here from the pull-down menu.
Note
: Users can access the OSD menu with an authorized account and go to
Monitor
,
Mouse
Sensitivity
to setup preferred sensitivity level of USB mouse.
