32
D-Link DNR-2060-08P User Manual
Section 3: Front Panel Operation
Set Preset Points
Call Preset Points
The NVR allows you to define a path made up of a number of preset positions. The number of
preset points on a path is dependent on the dome camera manufacturer.
To set preset points:
Press a
Channel
key to view the corresponding camera in full-screen.
Press
DOME
to the enter Dome Control mode. The dome control panel will be displayed.
Use the direction keys to pan/tilt the dome camera to desired position.
Click
Preset
on the dome control panel or press
CH1 key
to access the
Set
/
Go
Preset function.
The numeric keyboard will be displayed as below.
Input a desired preset number.
Click on the
Set Preset
button to save the position. Now the preset position is set and ready
to be called.
To call preset points:
Press a
Channel
key to view the corresponding camera in full-screen.
Then press
DOME
to enter Dome Control mode. The dome control panel will be displayed.
Click
Preset
on the dome control panel or press
CH1
key
to access the
Set
/
Go
Preset function.
The numeric keyboard will be displayed.
Input a desired preset number.
Click on the
Go
Preset
button to call the preset point. The selected dome camera will rotate
to the preset position automatically.
