D-Link DirectPort DMF-560TXD, Руководство пользователя

Страница: 38 / 79

- 32 -
Q:When the modem is connecting to another
modem, it reports a higher connect baud rate
that it is really using.
C:The modem defaults to report the modem-to-
computer baud rate when it responds with
CONNECT.
A:Go to command mode with your communication
program (like Telix) and type ATW2, then press
Enter. This tells the modem to report the modem-
to-modem baud rate instead
Q:When I run CARDEN, the error message show
C-Card is not enabled successfully”
C:No memory space to map the attribute memory of
PCMCIA card.
A:If memory management software e.g. EMM386 has
been installed, you have to reserve some areas in
upper memory (C000:0 -- EFFF:F) for attribute
memory of PCMCIA card during enabling the card.
Example:Device=C:\DOS\EMM386.EXE RAM
X=D000-D3FF.
Reserve D000 - D3FF for attribute memory.
C:No free I/O space or interrupt request can be
assigned to the PCMCIA card.
A:The LAN/Modem card needs 32 contiguous I/O
ports and one interrupt request for LAN. It also
need 8 contiguous I/O ports and another interrupt
request for 56K Fax/Modem. The LAN ports have
to be located at one of the following I/O space.
0x300, 0x320, 0x340, 0x360. The 56K Fax/Modem
ports have to be located at one of the 0x2F8,
0x3E8, 0x3E8. Besides for the compatibility
consideration with some of the 56K Fax/Modem
applications. The Modem interrupt (MIR) is
recommended to be assigned at value less than 7