D-Link DirectPort DMF-560TXD, Руководство пользователя

Страница: 33 / 79

- 27 -
Q:The modem does not give a response after an
AT command was executed.
C:The echo and/or responses may be turned off by the
ATE0Q1 commands. Use AT&V to check that.
A:Use ATE1Q0 then Enter to change them back.
C:Make sure the modem is in Command Mode not in
Data Mode when you type the AT command.
Q:The modem gives an 'ERROR' response after
an AT command was executed.
C:Make sure you did not type an invalid command.
C:Make sure your command line is 40 characters or
less in length.
Q:The modem goes off-hook and disables the
telephone line.
C:The modem may be set to auto-answer the phone
when it rings.
A:Disable auto-answer by typing ATS0=0 then Enter
at the command line.
Q:The modem does not auto-answer the phone.
C:If necessary, make sure the software is configured
to auto-answer the phone.
A:To set auto-answer mode on from the AT
commands, type ATS0=n then press Enter. The n
stands for which number of rings the modem will
answer on.
Ex: ATS0=3 takes the modem answer on the third
ring.
Q:The software does not control the modem
properly or can not detect the modem.
A:Make sure the software has been set up correctly.
Check the initialization and dial strings.