31
D-Link DIR-855L User Manual
Section 3 - Configuration
Select
PPPoE (Username/Password)
from the drop-down menu.
Advanced Domain Name System
(
DNS
) services enhances your Internet
performance by getting you the information and web pages you are looking for
faster and more reliably. In addition, it improves your overall Internet experience
by correcting many common typo mistakes automatically, taking you where
you intended to go and saving you valuable time.
Disclaimer:
D-Link makes no warranty as to the availability, reliability, functionality
and operation of the Advanced DNS service or its features.
Check to enable true Gigabit routing. This will increase the through-put of
the WAN-LAN connectivity of the router.
Select
Static IP
if your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses. In most cases, select
Dynamic
.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password in the next box.
Enter the ISP Service Name (optional).
Select either
Always-on
,
On-Demand
or
Manual
.
My Internet
Connection:
Enable
Advanced DNS
Service:
Enable True
Gigabit Routing
Connectivity:
Address Mode:
IP Address:
User Name:
Password:
Service Name:
Reconnect
Mode:
Manual Internet Setup
PPPoE (DSL)
Choose
PPPoE
(
Point to Point Protocol over Ethernet
) if your ISP uses a PPPoE connection. Your ISP will provide you with a
username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your
computer. The software is no longer needed and will not work through a router.
