DIR-853
AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Configuring via Web-based Interface
Creating LTE WAN Connection
If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to
creating an LTE WAN connection, go to the
USB Modem
menu and enter the PIN code
11
on the
page displayed (see the
USB Modem
section, page 153). Then on the connection creation page, go
to the
All Settings
tab, select the relevant value from the
Connection type
drop-down list, and
specify the needed values.
Figure 80. The page for creating a new
LTE
connection. Selecting a connection type.
Parameter
Description
Enable connection
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Connection name
Available for the advanced mode only.
A name for the connection for easier identification.
11 For some models of LTE USB modems it is required to disable the PIN code check on the SIM card prior to
connecting the USB modem to the router.
Page
98
of 228