DIR-853
AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Configuring via Web-based Interface
Figure 106. The window for adding a rule for the MAC filter.
You can specify the following parameters:
Parameter
Description
Frequency band
From the drop-down list, select a band of the wireless network.
SSID
A wireless network to which the rule will be applied. Select the
needed value from the drop-down list.
MAC address
In the field, enter the MAC address to which the selected filtering
mode will be applied.
Hostname
The name of the device for easier identification. You can specify any
name.
Enable
If the switch is moved to the right, the rule is active.
Move the switch to the left to disable the rule.
When you have configured the parameters, click the
SAVE
button.
To edit the parameters of the existing rule, in the
Filters
section, left-click the needed rule. In the
opened window, change the settings and click the
SAVE
button.
To remove the rule from the page, in the
Filters
section, select the checkbox located to the left of
the relevant rule and click the
DELETE
button (
).
After creating the rules you need to configure the filtering modes.
Page
134
of 228
