68
D-Link DIR-640L User Manual
Section 4 - Advanced
Source:
Schedule:
IP Address Range:
Destination:
Protocol:
Port Range:
New Schedule:
Use the
Source
drop-down menu to specify the interface that connects to the source addresses of the firewall rule.
Use the drop-down menu to select the time schedule that the IPv6 Firewall Rule will be enabled on. The schedule may be set to
Always
, which will allow the particular service to always be enabled. You can create your own times in the
Maintenance
>
Schedules
section.
Enter the source
IP Address
range.
Use the
Destination
drop-down menu to specify the interface that connects to the destination IP addresses of the firewall rule.
Select the protocol of the firewall port (
All
,
TCP
,
UDP
, or
ICMP
).
Enter the first port of the range that will be used for the firewall rule in the first box and enter the last port in the field in the second
box.
Click this button to create a new schedule.
