28
D-Link DIR-640L User Manual
Section 3 - Configuration
Select
Russian PPPoE (Dual Access)
from the drop-down menu.
Select
Static IP
if your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses. In most cases, select
Dynamic
.
Enter the IP address (static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password in the next box.
Enter the ISP service name (optional).
Select either
Always-on
,
On-Demand
, or
Manual
.
Enter a maximum idle time during which the Internet connection is
maintained during inactivity. To disable this feature, enable auto-reconnect.
Maximum Transmission Unit - you may need to change the MTU for optimal
performance with your specific ISP. 1492 is the default MTU.
The default MAC address is set to the Internet port’s physical interface MAC
address on the broadband router. It is not recommended that you change the default MAC address unless required by your ISP.
Select a
Dynamic IP
or
Static IP
if your WAN physical setting.
Enter the IP address for your PPTP connection.
Enter your PPTP subnet mask.
Enter the primary and secondary DNS server addresses (static PPPoE only).
My Internet
Connection Is:
Address Mode:
IP Address:
User Name:
Password:
Service Name:
Reconnect Mode:
Maximum Idle
Time:
MTU:
MAC Address:
WAN Physical
Setting:
IP Address
Subnet Mask:
DNS Addresses:
Russian PPPoE
Choose Russian PPPoE (Dual Access) if your ISP uses a PPPoE connection in Russia with WAN physical access.
