24
D-Link DIR-640L User Manual
Section 3 - Configuration
Select
PPTP
from the drop-down menu.
Select
Static IP
if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select
Dynamic
.
Enter the IP address for your PPTP connection.
Enter your PPTP subnet mask.
Enter the gateway IP address for your PPTP connection.
Enter the server IP address for your PPTP connection.
Enter your PPTP user name.
Enter your PPTP password and then retype the password in the next box.
Select either
Always-on
,
On-Demand
, or
Manual
.
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable
auto-reconnect.
Enter the primary and secondary DNS server addresses (Static PPTP only).
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default
MTU.
The default MAC address is set to the Internet port’s physical interface MAC address on the broadband router. It is not recommended
that you change the default MAC address unless required by your ISP.
My Internet
Connection Is:
Address Mode:
PPTP IP Address:
PPTP Subnet Mask:
PPTP Gateway IP
Address:
PPTP Server IP
Address:
User Name:
Password:
Reconnect Mode:
Maximum Idle
Time:
DNS Addresses:
MTU:
MAC Address:
PPTP
Choose PPTP if your ISP uses a PPTP connection. Your ISP will provide you with a username and password.
