D-Link DGS-3130-30PS страница 17 Скачать руководство пользователя | Manualshive

Страница: 17 / 83

background image

DGS-3130 Series Layer 3 Stackable Managed Switch Hardware Installation Guide

17

Figure 2-8 Side panels of the DGS-3130-30S

DGS-3130-30PS Switch

Front Panel Components

The front panel of DGS-3130-30PS features a variety of LED indicators and ports.

Figure 2-9 Front panel view of the DGS-3130-30PS

Ports that can be found on the front panel of this switch are listed in the table below.

Port

Description

USB

Inserting a flash drive into the USB 2.0 Type-A port provides an additional storage
space for portable firmware images and configuration files that can be copied to
and from the NVRAM of the Switch.

MGMT

The RJ45 Management (MGMT) port is an IP-based, Out-Of-Band (OOB) port for
Telnet, web, or SNMP management that operates at 10/100/1000 Mbps wire-
speed. This port can be used to configure the Switch without being connected to
the network.

Console (RJ45)

The RJ45 console port can be used to connect to the Command Line Interface
(CLI) of the Switch for configuration, management, and monitoring. This port uses
a special console cable (included in this package) with a DB9 interface to connect
the Switch to the serial port (COM) of the PC.

10/100/1000 Mbps RJ45 PoE
Ports

The Switch is equipped with 24 RJ45 Ethernet ports. These ports can operate at 10
Mbps, 100 Mbps, and 1 Gbps wire-speeds. These PoE ports are compliant to
IEEE802.3af and IEEE802.3at.

10 Gigabit RJ45 Ports

The Switch is equipped with 2 RJ45 Ethernet ports. These ports can operate at 1
Gbps and 10 Gbps wire-speeds.

10 Gigabit SFP+ Ports

The Switch is equipped with 4 SFP+ ports. These ports can operate at 1 Gbps and
10 Gbps wire-speeds and support a wide collection of SFP+ transceivers.

For a complete list of SFP/SFP+ transceivers that are compatible with this switch, refer to the

SFP Ports

and

SFP+

Ports

sections in

Appendix A - Technical Specifications

.

LED Indicators

Located on the front panel of this switch are LED indicators: Power, Console, RPS, Fan Err, USB, Link/Act indicators
for all the ports, and Stack ID.

«
...
15
16
17
18
19
...
»

Содержание DGS-3130-30PS




















































































Отзывы:

Нет отзывов

Похожие инструкции для DGS-3130-30PS

Бренд: Painless Performance Products Страницы: 2

SmartCell 6A000

Бренд: Cabletron Systems Страницы: 114

Бренд: Cabletron Systems Страницы: 62

CyberSWITCH CSX150

Бренд: Cabletron Systems Страницы: 49

Cabletron CyberSWITCH CSX5500

Бренд: Cabletron Systems Страницы: 729

ATLONA Omega AT-OME-MS52W

Бренд: Panduit Страницы: 123

Atlona AT-OME-MS42

Бренд: Panduit Страницы: 86

iMcV-Giga-FiberLinX-II

Бренд: IMC Networks Страницы: 60

Бренд: Zektor Страницы: 84

Бренд: Hamlet Страницы: 4

Бренд: PRO SIGNAL Страницы: 2

3C17205 - SuperStack 3 Switch 4400 PWR

Бренд: 3Com Страницы: 90

BNI EIP-950-000-Z009

Бренд: Balluff Страницы: 12

Бренд: Lionel Страницы: 8

Бренд: Allen-Bradley Страницы: 4

Grid Director 4700

Бренд: Mellanox Technologies Страницы: 88

SIRCO MOT PV UL

Бренд: socomec Страницы: 20

Бренд: Omron Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды