D-Link DGS-3000-28SC Скачать руководство пользователя страница 40

Страница: 40 / 45

DGS-3000-28SC Layer 2 Managed Stackable Gigabit Switch Hardware Installation Guide

•

DEM-312GT2 (1000BASE-SX, Multi-mode, 2km)

•

DEM-314GT (1000BASE-LHX, Single-mode, 50km)

•

DEM-315GT (1000BASE-ZX, Single-mode, 80km)

•

DEM-302S-LX (1000BASE-LX, Single-mode, 2km)

•

DGS-712 (1000BASE-T, 1G Copper, 100m)

WDM transceivers supported:

•

DEM-220T (100BASE-BX-D, TX-1550/RX-1310nm, Single-mode, 20km)

•

DEM-220R (100BASE-BX-U, TX-1310/RX-1550nm, Single-mode, 20km)

•

DEM-330T (1000BASE-BX-D, TX-1550/RX-1310nm, Single-mode, 10km)

•

DEM-330R (1000BASE-BX-U, TX-1310/RX-1550nm, Single-mode, 10km)

•

DEM-331T (1000BASE-BX-D, TX-1550/RX-1310nm, Single-mode, 40km)

•

DEM-331R (1000BASE-BX-U, TX-1310/RX-1550nm, Single-mode, 40km)

•

DEM-302S-BXD (1000BASE-BX-D, TX-1550/RX-1310 nm, Single-Mode, 2km)

•

DEM-302S-BXU (1000BASE-BX-U, TX-1310/RX-1550 nm, Single-Mode, 2km)

SFP+ Transceivers supported:

•

DEM-431XT (10GBASE-SR, (w/o DDM), 80m: OM1 & OM2 MMF, 300m: OM3
MMF)

•

DEM-431XT-DD (10GBASE-SR, (with DDM), 80m: OM1 & OM2 MMF, 300m: OM3
MMF)

•

DEM-432XT (10GBASE-LR, (w/o DDM), 10km)

•

DEM-432XT-DD (10GBASE-LR, (with DDM), 10km)

•

DEM-433XT (10GBASE-ER, (w/o DDM), 40km)

•

DEM-433XT-DD (10GBASE-ER, (with DDM), 40km)

•

DEM-434XT (10GBASE-ZR, (w/o DDM), 80km)

•

DEM-435XT (10GBASE-LRM, (w/o DDM), Multi-mode, 200m)

•

DEM-435XT-DD (10GBASE-LRM, (with DDM), Multi-mode, 200m)

•

DEM-436XT-BXU (10GBASE-BX-U, 20km, TX: 1270nm, RX: 1330nm)

•

DEM-436XT-BXD (10GBASE-BX-D, 20km, TX: 1330nm, RX: 1270nm)

SFP+ Direct Attached Cables (DAC) supported:

•

Direct Attached Cables are cables with built-in SFP+ transceivers at both ends.

•

DEM-CB100S (10GbE SFP+ 1m Direct Attach Cable)

•

DEM-CB300S (10GbE SFP+ 3m Direct Attach Cable)

•

DEM-CB700S (10GbE SFP+ 7m Direct Attach Cable)

RPS Port

•

Supports the connection to an external redundant power supply. In the event that
the AC internal power supply fails, the external RPS will take over the power supply.

RPS units and accessories supported:

•

DPS-200 (60 Watt redundant power supply unit (includes RPSU cable and AC
power cord))

•

DPS-200A (Redundant power supply (includes RPS cable and AC power cord))

•

DPS-500A (Redundant power supply (includes RPS cable and AC power cord))

•

DPS-500DC (HW: B1) (Redundant power supply (includes RPS cable))

•

DPS-CB150-2PS (HW: B1) (1 DC input connector for the RPS and 2 DC output
connectors for the Switch)

Содержание DGS-3000-28SC














































Результаты поиска

Содержание DGS-3000-28SC

Отзывы:

Похожие инструкции для DGS-3000-28SC

Бренды по названию

Популярные бренды

D-Link DGS-3000-28SC, Руководство по установке оборудования

Результаты поиска

Содержание DGS-3000-28SC

Отзывы:

Похожие инструкции для DGS-3000-28SC

Бренды по названию

Популярные бренды