D-Link DGS-3000-28SC Скачать руководство пользователя страница 37

Страница: 37 / 45

DGS-3000-28SC Layer 2 Managed Stackable Gigabit Switch Hardware Installation Guide

Humidity

Operation:

10% to 90% RH non-condensing

Storage:

5% to 90% RH non-condensing

Dimensions

440mm (W) x 210mm (D) x 44mm (H)

Weight

2.156 kg

EMI/EMC

CE Mark (2004/108/EC), EN 55022:2010+AC:2011, EN 55024:2010, EN 61000-3-
2:2006+A1:2009+A2:2009, EN 61000-3-3:2013

Safety

CE Mark (2006/95/EC), IEC 60950-1:2005+A1:2009+A2:2013, EN 60950-
1:2006+A11:2009+A1:2010+A12:2011+A2:2013

Performance

Feature

Detailed Description

Transmission Method

Store-and-forward

Packet Buffer

1.5 MByte (Max)

Maximum Forwarding
Rate

95.24 million packets per second.

Switching Capability

128Gbps

Priority Queues

8 Priority Queues per port

MAC Address Table

Supports 16K MAC addresses

Wire Speed

Full-wire speed (full-duplex) operation on all ports including Gigabit ports.

Physical Stacking

•

Two dedicated stacking ports on the front panel of the Switch. The last two SFP+
ports are used for physical stacking.

•

Provides bi-directional redundant stacking topology.

•

Topologies: Linear and Ring.

•

Bandwidth: Up to 10G.

•

The FCS version supports 6 units per stack. Supports backup master.

•

Supports inter-stacking trunking and mirroring.

Virtual Stacking /
Clustering

•

Supports D-Link Single IP Management v1.6

•

Manages up to 32 devices in a virtual stack with a single IP address.

LED Indicators

Location

LED Indicative

Color

Status

Description

Per Device

Power

Green

Solid Light

Power on.

Light off

Power off.

Console

Green

Solid Light

Console on.

Light off

Console off.

RPS

Green

Solid Light

RPS is connected and the RPS switch is
turned on.

Light off

RPS is not connected or the RPS switch is
turned off.

Fan Err

Red

Blinking

When any of the fans has failed.

Light off

When all fans work normally.

Содержание DGS-3000-28SC














































Результаты поиска

Содержание DGS-3000-28SC

Отзывы:

Похожие инструкции для DGS-3000-28SC

Бренды по названию

Популярные бренды

D-Link DGS-3000-28SC, Руководство по установке оборудования

Результаты поиска

Содержание DGS-3000-28SC

Отзывы:

Похожие инструкции для DGS-3000-28SC

Бренды по названию

Популярные бренды