D-Link DGS-1100-10MP Скачать руководство пользователя

Страница: 12 / 62

D-Link DGS-1100 MP/MPP Series Switch User Manual

DGS-1100-26MP

24-Port 10/100/1000 Mbps + 2-Port Combo 1000BASE-T/SFP PoE switch

Front Panel

Figure 2-5 – DGS-1100-26MP Front Panel

Power LED:

The Power LED lights up when the switch is connected to a power source.

Link/Act/Speed LED (Ports 1-24):

Solid Green: When there is a secure 1000Mbps connection at the port.

Blinking Green or Amber: Indicates that the switch is either sending or receiving data to the
port.

Solid Amber: Indicates that the port is running at 10/100Mbps.

Light off: No link.

PoE Mode (Ports 1-

24):

Green: Indicates that PoE mode is active.

Amber: Indicates that there is an issue with the PoE mode activating properly.

Light off: Indicates that PoE mode is not active.

Link/Act/Speed LED (Ports 25-26):

Solid Green: There is a secure 1000Mbps connection at the port.

Blinking Green: There is reception or transmission occurring at the port.

Solid Amber: Indicates that the port is running at 10/100Mbps.

Light off: No link.

LED Mode Button:

Pressing this button will change the LED behavior from Link mode, and PoE

Mode.

Reset:

By pressing the Reset button until the power LED turns amber,

the switch will change back to

the default configuration and all changes will be lost.

NOTE:

The LED behavior for ports 1- 24 will switch between Link mode and PoE

mode when the PoE mode is active.

Содержание DGS-1100-10MP































































Результаты поиска

Содержание DGS-1100-10MP

Отзывы:

Похожие инструкции для DGS-1100-10MP

Бренды по названию

Популярные бренды

D-Link DGS-1100-10MP, Справочное руководство

Результаты поиска

Содержание DGS-1100-10MP

Отзывы:

Похожие инструкции для DGS-1100-10MP

Бренды по названию

Популярные бренды