D-Link DGS-1100-06/ME, Справочное руководство CLI

Страница: 62 / 275

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
50
Total Entries: 5
DGS-1100-06/ME:5#
show snmp global state
Purpose To display the global state of SNMP currently configured on the
Switch.
Syntax
show snmp global state
Description The
show snmp global state
command displays the global state of
SNMP groups currently configured on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the currently configured SNMP global state on the Switch:
DGS-1100-06/ME:5#show snmp global state
Command: show snmp global state
SNMP Global State : Enable
DGS-1100-06/ME:5#
create snmp host
Purpose To
create a recipient of SNMP traps generated by the Switch’s
SNMP agent.
Syntax
create snmp host <ipaddr> [v1 <username 32> | v2c <username
32> | v3 [noauth_nopriv | auth_nopriv | auth_priv] <username
32>] {[InterfaceName <string 20>]}
Description The
create snmp host
command creates a recipient of SNMP traps
generated by the Switch’s SNMP agent.
Parameters
<ipaddr>
− The IP address of the remote management station to
serve as the SNMP host for the Switch.
v1
– Specifies that SNMP version 1 is to be used. The Simple
Network Management Protocol (SNMP), version 1, is a network
management protocol that provides a means to monitor and control
network devices.
v2c
– Specifies that SNMP version 2c is to be used. The SNMP v2c
supports both centralized and distributed network management
strategies. It includes improvements in the Structure of Management
Information (SMI) and adds some security features.
v3
– Specifies that the SNMP version 3 is to be used. SNMP v3
provides secure access to devices through a combination of
authentication and encrypting packets over the network. SNMP v3
adds: