Incoming
This chapter describes steps to create policies for packets and services from
the External (WAN) network to the Internal (LAN) network including Mapped
IP and Virtual Server.
Enter Incoming window:
Step 1:
Click
Incoming
under the
Policy
menu to enter the Incoming
window. The Incoming
table will display current defined policies
from the External (WAN) network to assigned Mapped IP or
Virtual Server.
Step 2:
The fields of the
Incoming
window are:
Source:
source networks which are specified in the
External
section of the
Address
menu, or all the external network addresses.
Destination:
destination networks, which are IP Mapping addresses
or Virtual server network addresses created in
Virtual Server
menu.
Service:
services supported by Virtual Servers (or Mapped IP).
Action:
control actions to permit or deny packets from external
networks to Virtual Server/Mapped IP travelling through the
FIREWALL VPN ROUTER.
- 97 -
Содержание DFL-300 - Security Appliance
