D-Link DES-6300, Руководство пользователя, Страница: 86 / 298

Modular L3 Ethernet Switch User’s Guide
77
Port Speed (bps) – The synchronized port speed in bps.
Admin. Status – Controls the traffic from the selected port. By default, this
parameter is set to Enable. The options are as follows:
• On – Select this option to permit the traffic through the port.
•
Off – Select this option to stop the traffic.
Port Status – Indicates if the interface is operational (Up), non-operational
(Down), or engaged in a test procedure so it does not carry traffic (Testing).
Duplex Admin Mode
– Specifies the conversation type for the interface. The
options are as follows:
•
Full – The interface supports transmission between the device and the
client in both directions simultaneously.
•
Half – The interface supports transmission between the device and the
client in only one direction at a time.
Duplex Operation Mode – The port synchronization mode.
Assign Physical Address – To assign a physical address. The options are as
follows:
•
Select Default to use the default address.
•
Reserve to assign a unique address (up to 264 unique addresses), in
incrementing order.
Autonegotiation Mode – This mode setting determines whether the Switch will
automatically negotiate for the fastest possible connection. The options are as
follows:
•
Enable – Select this option to enable the optimal connection speed.
•
Disable – Select this option to disable this feature.
To edit a Port Properties Main tab field:
1. Display the Port Properties Main tab.
Edit one of the following fields:
•
Speed Admin Mode.
•
Port Speed (bps).
•
Admin Status.
•
Duplex Admin Mode.
•
Duplex Operation Mode.
•
Assign Physical Address.
2. Click . When the
Status field displays “ Finished!”, the fields are confirmed as
modified. The following figure illustrates the Port Parameters window Other tab: