D-Link DES-6300, Руководство пользователя, Страница: 207 / 298

Modular L3 Ethernet Switch User’s Guide
198
•
Forwarding – The port and the next hop are currently being used to
forward multicast packets.
Up Time – Indicates the time lapse since the router learned the multicast
information.
Expiry Time – Indicates the time in ticks before the entry expires. A value of 0
indicates that the entry is not expired. However, if the Hop Status is Pruned , the
value indicates the amount of time remaining before the port and next hop revert to
Forwarding .
Protocol – Identifies the routing protocol used to find the next hop. The possible
values are:
•
Other – Indicates that none of the below listed protocols are used to find
the next upstream or parent interface for the next-hop.
•
Local – Indicates that at manually configured protocol was used to find the
next upstream or parent interface for the next-hop.
•
Netmgmt – Indicates that the Network Management Protocol was used to
find the next upstream or parent interface for the next-hop. This route is
static.
•
ICMP – Indicates that the Internet Control Message Protocol was used to
find the next upstream or parent interface for the next-hop.
•
RIP – Indicates that the Routing Information Protocol was used to find the
next upstream or parent interface for the next-hop.
•
OSPF – Indicates that the Open First Path First Protocol was used to find
the next upstream or parent interface for the next-hop.
•
BGP – Indicates that the Border Gateway Protocol was used to find the
next upstream or parent interface for the next-hop.
•
DVRMP – Indicates that the Internet Control Message Protocol was used
to find the next upstream or parent interface for the next-hop.
IPX
The
IPX menu has the following menu options:
Interface Parameters
RIP/SAP Filters
Routing Table
SAP Table
Interface Parameters
To display the IPX Router Interface Parameters window:
Select Router > IPX > Interface Parameters . The IPX Router Interface Parameters window
opens: