Modular Ethernet Switch User’s Guide
Using the Console Interface
67
Figure 6-51. Ping Test screen
After filling in the fields above, press START to initiate the Ping test.
The fields you can set are:
♦
Destination IP Address
The IP address of the device to be Pinged.
♦
No. of Pings
Number of times the Switch should send the Ping (1-255). If zero is chosen, the Switch will
continue Pinging indefinitely.
In the lower part of the
Ping Test
screen, you can view the Results of the Ping test.
Save Settings to TFTP Server
Choose
Save Settings to TFTP Server
from the
Utilities
menu (under
System Utilities
on the main
menu) to access the following screen:
Figure 6-52. Save Settings to TFTP Server screen
Press START to begin the upload. The result will be displayed in the lower part of the screen.
The fields you can set are:
♦
Server IP Address
The IP address of the TFTP server where you wish to save the settings for the
Switch.