NETVANTA HSSI WIDE MODULE
P/N 1200934L1
For more detailed documentation, visit us online at
www.adtran.com
Quick Start Guide
Quick Start Guide, 61200934L1-13A, July 2004
Technical Support 1-888-4ADTRAN (1-888-423-8726)
Copyright
©
2004 ADTRAN, All Rights Reserved
S
PECIFICATIONS
Interface Type:
50 pin SCSI-II female connector
Line Rate:
0-52 Mbps
Signal Type:
Electrically balanced with Non Return to Zero
encoding
Diagnostics/Testing:
HSSI Loopbacks, HSSI External loopback control
with T3SU or DSU/CSU
Environmental:
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Relative Humidity: up to 95% Noncondensing
Compliance:
FCC Part 15 Class A, UL 60950/CSA-C22.2
No. 60950, EN 60950, IEC 60950,
AS/NZS 60950, EN 55022, EN 54024
HSSI P
INOUT
PIN# (+ side)
PIN# (- side)
Direction
Description
1
26
—
HSSI SG - Signal Ground
2
27
I
HSSI RT - Receive Timing
3
28
I
HSSI CA - DCE Available
4
29
I
HSSI RD - Receive Data
5
30
I
HSSI LC - Loopback Circuit C
6
31
I
HSSI ST - Send Timing
7
32
—
HSSI SG - Signal Ground
8
33
O
HSSI TA - DTE Available
9
34
O
HSSI TT - Terminal Timing
10
35
O
HSSI LA - Loopback Circuit A
11
36
O
HSSI SD - Send Data
12
37
O
HSSI LB - Loopback Circuit B
13
38
—
HSSI SG - Signal Ground
14
—
—
No Connection
15
40
—
No Connection
16
41
—
No Connection
17
42
—
No Connection
18
43
—
No Connection
19
44
—
HSSI SG - Signal Ground
20
45
—
No Connection
21
46
—
No Connection
22
47
—
No Connection
23
—
—
No Connection
24
49
I
HSSI TM - Test Mode
25
50
—
HSSI SG - Signal Ground
I
NSTALLATION
I
NSTRUCTIONS
1.
Remove the cover plate from the appropriate option slot in the
NetVanta 5305 Base Unit.
2.
Slide the NetVanta HSSI Wide Module into the option slot until the
module is firmly positioned against the front of the chassis.
3.
Secure the thumbscrews at both edges of the module. Tighten with a
screwdriver.
4.
Connect the cables to the associated device(s).
5.
Complete the installation of the system as specified in the Hardware
Installation Guide (P/N 61200890L1-34 or P/N 61200990L1-34).
