manualshive.com logo in svg

D-Link DES-5600, Руководство пользователя

Поделиться
Скачать
D-Link DES-5600 Скачать руководство пользователя страница 92

Fast Ethernet Switching System User’s Guide

Web Management

85

Number of frames (including frames with errors) that were 128 to 255 bytes long.

Rx256 to 511

Number of frames (including frames with errors) that were 256 to 511 bytes long.

Rx512 to 1023

Number of frames (including frames with errors) that were 512 to 1023 bytes long.

Rx 1024 to 1518

Number of frames (including frames with errors) that were 1024 to 1518 bytes
long.

Rx Good Oversized

Number of good oversized frames received.

Rx Error Oversized

Number of error oversized frames received.

Rx Good Undersized

Number of good undersized frames received.

Rx Error Undersized

Number of undersized frames received with errors.

Unicast Frames In

Number of unicast frames received.

Multicast Frames In

Number of mulitcast frames received.

Broadcast Frames In

Number of broadcast frames received.

Rx Align Errors

Number of aligned frames that were received with alignment errors.

Содержание DES-5600






































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды