D-Link DES-3350SR, Справочное руководство

Страница: 279 / 486

DES-3350SR Layer 3 Gigabit Switch
31
Command Parameters
create snmp group <groupname 32> {v1 | v2c |v3 [noauth_nopriv | auth_nopriv |
auth_priv ]} {read_view <view_name 32> | write_view <view_name
32> | notify_view <view_name 32>}
delete snmp group <groupname 32>
show snmp groups
create snmp host <ipaddr> {v1 |v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]}
<auth_string 32>
delete snmp host <ipaddr>
show snmp host {<ipaddr>}
create trusted_host <ipaddr>
delete trusted_host <ipaddr>
show trusted_host {<ipaddr>}
enable snmp traps
enable snmp
authenticate traps
disable snmp traps
disable snmp
authenticate traps
config snmp system_
contact <sw_contact>
config snmp system_
location <sw_location>
config snmp system
_name <sw_name>
enable rmon
disable rmon
Each command is listed, in detail, in the following sections.
create snmp user
Purpose Used to create a new SNMP user and adds the user to an SNMP
group that is also created by this command.
Syntax
create snmp user <username 32> <groupname 32> {encrypted
[by_password auth [md5 <auth_password 8-16> | sha
<auth_password 8-20>] priv [none | des <priv_password 8-
16> ] | by_key auth [md5 <auth_key 32-32>| sha <auth_key 40-
40>] priv [none | des <priv_key 32-32> ]]}