D-Link DES-3216 Скачать руководство пользователя страница 30

Страница: 30 / 70

10/100 Auto Negotiation Switch User’s Guide

Managing the DES-3216

Software Version

Specifies the software version being used on the DES-3216. You can update the software.
Each version is numbered incrementally.

MAC Address

Specifies the hardwired address of the DES-3216. This address cannot be changed.

System Description

Brief manufacturer description of the DES-3216. This value cannot be changed.

System Name

Specifies the full name of the DES-3216. This value can be changed, allowing you to assign
a unique name to the DES-3216. You can enter up to 44 characters.

System Location

Specifies the physical location of the DES-3216, such as a building number or street address.
You can enter up to 44 characters.

System Contact

Specifies the contact information of the network administrator. You can enter up to 44
characters.

LAN IP Address

Specifies the unique IP address of your LAN. You can enter up to 15 characters.

LAN Subnet Mask

Specifies the subnet mask, if you are subnetting. If you are not subnetting leave the default in
place. You can enter up to 15 characters.

LAN Default Gateway

Specifies the default gateway. You can enter up to 15 characters.

Follow these steps to enter user changeable information:

Select the field you would like to edit.

Delete the default information

Enter the new information.

Select Save and press Enter. Follow screen prompts.

Содержание DES-3216







































































Результаты поиска

Содержание DES-3216

Отзывы:

Похожие инструкции для DES-3216

Бренды по названию

Популярные бренды

D-Link DES-3216, Руководство пользователя

Результаты поиска

Содержание DES-3216

Отзывы:

Похожие инструкции для DES-3216

Бренды по названию

Популярные бренды