D-Link DES-3216 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 70

background image

10/100 Auto Negotiation Switch User’s Guide

Installing the DES-3216

6

2. Install the DES-3216 on the desktop/shelf where you would like to place it.

Rack Installation

The DES-3216 can be mounted in an EIA standard size, 19 inch rack. The dimensions of the
DES-3216 are 17.4 x 10.4 x 3.2 inches. The DES-3216 can be placed in a wiring closet along
with other equipment.

Follow these steps to install the DES-3216 on a rack:

1. Attach a mounting bracket to each side of the DES-3216 with the screws provided.

2. Slide the DES-3216 into the rack and use the screws provided to secure the DES-3216 to

the rack.

3. Connect the power cord and verify that the DES-3216 is receiving adequate power.

Power On

The power supply will adjust to the local power source automatically. The DES-3216 may be
plugged in without having any or with all LAN segment cables connected.

The power plug is located at the rear of the DES-3216. Plug the cable into the wall socket
and plug the other end into the DES-3216. There is a power on/ off switch located at the rear
of the DES-3216. Move the switch to the on position to power the DES-3216 on. The Power
LED will light and all ports will auto negotiate the proper speed and duplex mode when the
DES-3216 is powered on.

Reboot the DES-3216 if there is a problem. Contact D-Link Systems, Inc. for technical
support.

Check the configuration of the DES-3216 after a power failure but do not reset unless it is
necessary.

The DES-3216 can be used with power sources in the range 100 to 240 VAC., 50 to 60 Hz.

«
...
12
13
14
15
16
...
»

Содержание DES-3216







































































Отзывы:

Нет отзывов

Похожие инструкции для DES-3216

Бренд: 3Com Страницы: 2

CoreBuilder 5000

Бренд: 3Com Страницы: 16

CoreBuilder 9000

Бренд: 3Com Страницы: 24

dominion kx III

Бренд: Raritan Страницы: 6

Бренд: Raritan Страницы: 5

DOMINION KSX II

Бренд: Raritan Страницы: 7

Бренд: Raritan Страницы: 2

Бренд: Movie Vision Страницы: 2

Бренд: SMC Networks Страницы: 2

Бренд: Omega Engineering Страницы: 8

EdgeSwitch 10 XP

Бренд: Ubiquiti Страницы: 13

Бренд: AbleNet Страницы: 12

BONANZA ACCU-SIM V35B

Бренд: A2A Simulations Страницы: 112

FRIENDLYNET FS4116R

Бренд: Asante Страницы: 6

LVP-51 LVP-51 Series

Бренд: Omega Engineering Страницы: 6

Бренд: DX Engineering Страницы: 4

AVS-OCT-3264-360

Бренд: AMX Страницы: 1

Бренд: Metra Electronics Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды