10/100 Fast Ethernet Switch User’s Guide
Using the Console Interface
53
“password” to control access to the Switch. If the Switch receives
a request with a community name it does not recognize, it will
trigger an authentication trap.
The SNMP allows up to four different community names to be
defined. The community name
public
is defined by default; you
can change this name in addition to adding others. You will need
to coordinate these names with the community name settings you
use in your network management system.
The following SNMP Manager Configuration parameters can be
set:
♦
Access Rights:
allows each community to be separately
set to either
read only
or
read/write
.
♦
Status:
determines whether this SNMP Community name
entry is valid or invalid.
Figure 6-15. SNMP Manager Configuration
