D-Link DES-3208 Скачать руководство пользователя

Страница: 71 / 98

10/100 Fast Ethernet Switch User’s Guide

Using the Console Interface

♦

Bytes Tx (Bytes Sent):

The number of good bytes sent

from the respective port.

♦

Tx (Good) (Frames Sent):

The number of good frames

sent from the respective port.

♦

Bytes Rx (Bytes Received):

The number of good bytes

received. This also includes local and dropped packets.

♦

Rx (Good) (Frames Received):

The number of good

frames received. This also includes local and dropped
packets.

♦

Total Bytes Rx (Total Bytes Received):

The number of

bytes received ---- good and bad.

♦

Multicast Rx (Multicast Frames Received):

The

number of good multicast frames received. This includes
local and dropped multicast packets.

♦

Broadcast Rx (Broadcast Frames Received):

The

number of good broadcast frames received. This includes
local and dropped broadcast packets.

♦

64 Octs

65-127 Octs

128-255 Octs

256-511 Octs

512-

1023 Octs

1024-1518 Octs:

The number of good frames

of various length ranges, both valid and invalid.

♦

Total Frames Rx (Total Frames Received):

The

number of frames received --- good and bad.

Содержание DES-3208



































































































Результаты поиска

Содержание DES-3208

Отзывы:

Похожие инструкции для DES-3208

Бренды по названию

Популярные бренды

D-Link DES-3208, Руководство пользователя

Результаты поиска

Содержание DES-3208

Отзывы:

Похожие инструкции для DES-3208

Бренды по названию

Популярные бренды