D-Link DES-3208 Скачать руководство пользователя

Страница: 5 / 98

Software:

D-Link warrants that the software programs licensed from it will perform in substantial

conformance to the applicable published program specifications for a period of ninety (90) days

from the date of purchase from D-Link or its Authorized Reseller. D-Link warrants the

magnetic media containing software against failure during the warranty period. No updates

are provided. D-Link's sole obligation hereunder shall be to replace any defective software

products with products which substantially conform to D-Link's applicable published

specifications. Customer assumes responsibility for the selection of the appropriate applications

program and associated reference materials. D-Link makes no warranty that its software

products will work in combination with any hardware or applications software products

provided by third party, that the operation of the software products will be uninterrupted or

error free, or that all defects in the software product will be corrected. For any third party

products listed in the D-Link software product documentation or specifications as being

compatible, D-Link will make reasonable efforts to provide compatibility, except where the non-

compatibility is caused by "bug" or defect in the third party's product.

Warranty service for software products may be obtained by contacting a D-Link office within

the warranty period. Where no Product Registration Card has been sent by Customer, proof of

purchase, such as a copy of the dated purchased invoice, must be provided.

D-Link Offices to Contact for Warranty Service:

To obtain an RMA number for warranty service, contact the D-Link office nearest you. A list of

contact addresses for D-Link’s international offices is found in the back of this User’s Guide.

Your Warranty Registration Card should also be sent to your regional D-Link office.

Содержание DES-3208



































































































Результаты поиска

Содержание DES-3208

Отзывы:

Похожие инструкции для DES-3208

Бренды по названию

Популярные бренды

D-Link DES-3208, Руководство пользователя

Результаты поиска

Содержание DES-3208

Отзывы:

Похожие инструкции для DES-3208

Бренды по названию

Популярные бренды