manualshive.com logo in svg

D-Link DES-3028, Справочное руководство CLI

"Пользовательское руководство для D-Link DES-3028 доступно для бесплатного скачивания на нашем сайте. Получите полное руководство по эксплуатации этого продукта, чтобы настроить и оптимизировать вашу сеть. Загрузите его сейчас с нашего manualshive.com и начните использовать ваш оборудование эффективно."

Поделиться
Скачать
background image

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual

 

 

173

config access_profile 

Parameters

 

ip

 

 Specifies that the Switch will look into the IP fields in each packet. 

vlan <vlan_name 32>

  

 Specifies that the access profile will apply to only this VLAN. 

source_ip <ipaddr>

 

 Specifies that the access profile will apply to only packets with this 

source IP address. 

destination_id <value 0-255>

 

 Specifies that the access profile will apply to only packets 

with this destination IP address. 

dscp <value 0-63> 

 Specifies that the access profile will apply only to packets that have 

this value in their Type-of-Service (DiffServ code point, DSCP) field in their IP packet 
header 

icmp

 

 Specifies that the Switch will examine the Internet Control Message Protocol 

(ICMP) field within each packet.   

igmp 

 Specifies that the Switch will examine the Internet Group Management Protocol 

(IGMP) field within each packet. 

tcp

 

 Specifies that the Switch will examine the Transmission Control Protocol (TCP) field 
within each packet. 

src_port <value 0-65535>

 

 Specifies that the access profile will apply only to 

packets that have this TCP source port in their TCP header. 

dst_port <value 0-65535> 

 Specifies that the access profile will apply only to 

packets that have this TCP destination port in their TCP header. 

flag_mask

 – Enter the type of TCP flag to be masked.  

 

 

 

all

: all flags are selected.   

urg

: TCP control flag (urgent)   

ack

: TCP control flag (acknowledgement)    

psh

: TCP control flag (push)   

rst

: TCP control flag (reset)   

syn

: TCP control flag (synchronize)  

fin

: TCP control flag (finish)      

udp 

 Specifies that the Switch will examine the Universal Datagram Protocol (UDP) field 

in each packet.

 

 

src_port <value 0-65535> 

 Specifies that the access profile will apply only to 

packets that have this UDP source port in their header.   

dst_port <value 0-65535> 

 Specifies that the access profile will apply only to 

packets that have this UDP destination port in their header.   

protocol_id <value 0-255>

 

 Specifies that the Switch will examine the protocol field in each 

packet and if this field contains the value entered here, apply the following rules. 

packet_content 

– Specifies that the switch will mask the packet header beginning with the 

offset value specified as follows: 

 

offset_0-76 

 Enter a value in hex form to mask the packet from byte 0 to byte 76.

 

Parameters

 

port <portlist> 

 Specifies the port number on the Switch to permit or deny access for the rule. 

The user can also configure “all” to specify all ports. 

 

permit 

– Specifies that packets that match the access profile are permitted to be forwarded by 

the Switch. 

 

priority <value 0-7>

 

 This parameter is specified if you want to re-write the 802.1p 

default priority previously set in the Switch, which is used to determine the CoS queue to 
which packets are forwarded to. Once this field is specified, packets accepted by the 
Switch that match this priority are forwarded to the CoS queue specified previously by the 
user. 

 

{replace_priority_with <value 0-7>} 

 Enter this parameter if you want to re-write the 

802.1p default priority of a packet to the value entered in the Priority field, which meets 
the criteria specified previously in this command, before forwarding it on to the specified 
CoS queue. Otherwise, a packet will have its incoming 802.1p user priority re-written to 
its original value before being forwarded by the Switch. 

rx_rate

 – Use this to limit Rx bandwidth for the profile being configured. This rate is 

Содержание DES-3028







































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DES-3028

OEZ PS-LT Instructions For Use preview
PS-LT
Бренд: OEZ Страницы: 5
Handic VIC-Switch User Manual preview
VIC-Switch
Бренд: Handic Страницы: 2
Balluff NAMUR BES G06MD-GNX10B-EV02-EEX Operating Instructions Manual preview
NAMUR BES G06MD-GNX10B-EV02-EEX
Бренд: Balluff Страницы: 56
LevelOne Infinity IES-1881 Quick Installation Manual preview
Infinity IES-1881
Бренд: LevelOne Страницы: 2
Penguin Edge RTM-ATCA-F140 Quick Start Manual preview
Edge RTM-ATCA-F140
Бренд: Penguin Страницы: 2
Hirschmann OS20-001000T5T5TAFUHB User Manual preview
OS20-001000T5T5TAFUHB
Бренд: Hirschmann Страницы: 40
Zamel GRG-01 Quick Start Manual preview
GRG-01
Бренд: Zamel Страницы: 2
FS S3200 Series Quick Start Manual preview
S3200 Series
Бренд: FS Страницы: 41
HIKVISION DS-PDEB-EG2-WE Manual preview
DS-PDEB-EG2-WE
Бренд: HIKVISION Страницы: 5
Nobile 9109011003 Mounting And Operation Instructions preview
9109011003
Бренд: Nobile Страницы: 2
Cabletron Systems SEHI SEHI100TX- User Manual preview
SEHI SEHI100TX-
Бренд: Cabletron Systems Страницы: 75
SICK MSL Series Operating Instructions Manual preview
MSL Series
Бренд: SICK Страницы: 299
N-Tron 100M12 Installation Manual preview
100M12
Бренд: N-Tron Страницы: 15
HighSecLabs K304 Quick Start Manual preview
K304
Бренд: HighSecLabs Страницы: 2
TLS Electronics 875300 User Manual preview
875300
Бренд: TLS Electronics Страницы: 12
Kramer VS-211X Quick Start Manual preview
VS-211X
Бренд: Kramer Страницы: 2
Watt Stopper WI-200 Installation Instructions preview
WI-200
Бренд: Watt Stopper Страницы: 2
Steren FASTHOME 550-030 Installation Manual preview
FASTHOME 550-030
Бренд: Steren Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды