D-Link DES-2110, Руководство пользователя

Страница: 40 / 126

To change the port setting, click on the ID parameter to enter to the
selected port to configure its Speed/Disable, Flow control and QoS
setting.
Figure 18.
Speed:
Port 1~9: This setting has six modes -- 100M Full , 100M Half , 10M
Full , 10M Half, Auto and Disable for speed or port disable selections.
Port 10: This setting has three modes -- 1G Full, Auto and Disable
for speed or port disable selections.
Flow Control:
This setting determines whether or not the Switch will be handling
flow control. Set
Flow Control to Enable for avoiding data transfer
overflow. Or it sets to Disable ; there is either no flow control or other
hardware/software management.
When the port is set to
forced mode , then the flow control will
automatically set to Disable.
QoS:
In some ports that need to have a high priority to manage the data
transfer, QoS should be change. Set the port’s QoS to
high to
determine the port will always transfer their data first.
32