D-Link DES-2110 страница 122 Скачать руководство пользователя | Manualshive

Страница: 122 / 126

background image

data of Purchaser contained in, stored on, or integrated with any product
returned to D-Link pursuant to this warranty.

Any package returned to D-Link without an RMA number will be rejected and
shipped back to Purchaser at Purchaser's expense, and D-Link reserves the
right in such a case to levy a reasonable handling charge in addition mailing or
shipping costs.

Software:

Warranty service for software products may be obtained by contacting a D-Link
office within the applicable warranty period. A list of D-Link offices is provided
at the back of this manual, together with a copy of the Registration Card. If a
Registration Card for the product in question has not been returned to a D-Link
office, then a proof of purchase (such as a copy of the dated purchase invoice)
must be provided when requesting warranty service. The term "purchase" in
this software warranty refers to the purchase transaction and resulting license to
use such software.

D-Link warrants that its software products will perform in substantial
conformance with the applicable product documentation provided by D-Link with
such software product, for a period of ninety (90) days from the date of
purchase from D-Link or its Authorized Reseller. D-Link warrants the magnetic
media, on which D-Link provides its software product, against failure during the
same warranty period. This warranty applies to purchased software, and to
replacement software provided by D-Link pursuant to this warranty, but shall not
apply to any update or replacement which may be provided for download via the
Internet, or to any update which may otherwise be provided free of charge.

D-Link's sole obligation under this software warranty shall be to replace any
defective software product with product which substantially conforms to D-Link's
applicable product documentation. Purchaser assumes responsibility for the
selection of appropriate application and system/platform software and associated
reference materials. D-Link makes no warranty that its software products will work
in combination with any hardware, or any application or system/platform software
product provided by any third party, excepting only such products as are
expressly represented, in D-Link's applicable product documentation as being

«
...
120
121
122
123
124
...
»

Содержание DES-2110































































































































Отзывы:

Нет отзывов

Похожие инструкции для DES-2110

Бренд: Accedian Страницы: 2

COOPER POWER SERIES

Бренд: Eaton Страницы: 32

Бренд: Keithley Страницы: 452

S5500-SI Series

Бренд: H3C Страницы: 130

S5500-EI series

Бренд: H3C Страницы: 19

S5500-EI series

Бренд: H3C Страницы: 91

S5500-EI series

Бренд: H3C Страницы: 24

S5500-EI series

Бренд: H3C Страницы: 69

S5120-SI Series

Бренд: H3C Страницы: 4

S5120-SI Series

Бренд: H3C Страницы: 209

S5120-SI Series

Бренд: H3C Страницы: 70

S5120-EI Series

Бренд: H3C Страницы: 32

Бренд: H3C Страницы: 83

Бренд: H3C Страницы: 26

S5500-SI Series

Бренд: H3C Страницы: 6

Бренд: UNICOM Страницы: 1

STI Echotel 919

Бренд: Magnetrol Страницы: 12

Бренд: DLS Страницы: 226

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды