32
D-Link DCS-7000L User Manual
Section 4: Configuration
Enable PPPoE:
User Name /
Password:
HTTP Port:
Access Name for
Stream 1~3:
HTTPS Port:
RTSP Port:
Enable CoS:
Enable QoS:
Enable IPv6:
Enable this setting if your network uses PPPoE.
Enter the username and password for your PPPoE account. Re-
enter your password in the Confirm Password field. You may
obtain this information from your ISP.
The default port number is 80.
The default name is video#.mjpg, where # is the number of the
stream.
You may use a PC with a secure browser to connect to the HTTPS
port of the camera. The default port number is 443.
The port number that you use for RTSP streaming to mobile
devices, such as mobile phones or PDAs. The default port number
is 554. You may specify the address of a particular stream. For
instance, live1.sdp can be accessed at rtsp://x.x.x.x/video1.sdp
where the x.x.x.x represents the ip address of your camera.
Enabling the Class of Service setting implements a best-effort
policy without making any bandwidth reservations.
Enabling QoS allows you to specify a traffic priority policy to
ensure a consistent Quality of Service during busy periods. If the
DCS-7000L is connected to a router that itself implements QoS,
the router's settings will override the QoS settings of the camera.
Enable the IPv6 setting to use the IPv6 protocol. Enabling the
option allows you to manually set up the address, specify an
optional IP address, specify an optional router and an optional
primary DNS.
