53
D-Link DCS-7000L User Manual
Section 4: Configuration
Advanced
Here you can configure the ICR and IR settings. An IR(Infrared) Cut-Removable (ICR)
filter can be disengaged for increased sensitivity in low light environments.
ICR and IR
Automatic:
Day Mode:
Night Mode:
Schedule Mode:
IR Light Control:
Off:
On:
Sync:
Schedule:
The Day/Night mode is set automatically. Generally, the camera
uses Day mode and switches to Night mode when needed.
Day mode enables the IR Cut Filter.
Night mode disables the IR Cut Filter.
Set up the Day/Night mode using a schedule. The camera will
enter Day mode at the starting time and return to Night mode at
the ending time.
The camera can enable or disable the IR (infrared) light according
to your preferences. This setting provides additional controls
depending on your specific application.
The IR light will always be off.
The IR light will always be on.
The IR light will turn on when the ICR sensor is on.
The IR light will turn on or off according to the schedule that you
specify below.
