31
D-Link DCS-7000L User Manual
Section 4: Configuration
Network Setup
Use this section to configure the network connections for your camera. All
relevant information must be entered accurately. After making any changes, click
the
Save Settings
button to save your changes.
DHCP:
Static IP
Address:
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
Enable UPnP
Presentation:
Enable UPnP
Port Forwarding:
Forwarding
Port:
Forwarding
Status:
Select this connection if you have a DHCP server running on
your network and would like your camera to obtain an IP address
automatically.
You may obtain a static or fixed IP address and other network
information from your network administrator for your camera.
Enter the fixed IP address in this field.
This number is used to determine if the destination is in the same
subnet. The default value is 255.255.255.0.
The gateway used to forward data to.
The primary domain name server translates names to IP
addresses.
The secondary DNS acts as a backup to the primary.
Enabling this setting allows your camera to be configured as a
UPnP device on your network.
Enabling this setting allows the camera to specify a port to
forward for remote UPnP connections.
Enter the UPnP port you wish to forward, and click
Test
to check
whether it is available.
Displays the current UPnP port forwarding status.
