63
D-Link DCS-5029L User Manual
63
Section 4 - Configuration
Maintenance
Admin
This section allows you to change the administrator’s password and configure the settings for your camera. You can also create user account(s)
for individuals allowed to access your camera. These users will only be able to access the Live Video page, and will not be able to change settings.
New Password:
Add User
Account:
User List:
IP Camera Name:
Enable OSD:
Label:
Show Time:
Calibration
Device:
LED Control:
Privacy Control:
To change the admin password used to log into the Web interface, enter the
New Password
and enter it again in the next field to confirm. Click
Save
.
To create a new user account, enter a
User Name
,
New Password
, and enter
the password again in the
Retype Password
field to confirm. Click
Add
. A
maximum of eight user accounts can be created.
Displays a
User Name
for each authorized user. The administrator can delete
an account by clicking on the
Delete
button.
Enter a name for your camera.
Check the box to enable the on-screen display (OSD) that you will see when
viewing the video from your camera.
Enter a
Label
that will be displayed when the OSD is enabled.
Check the box to enable the time-stamp display on the screen, and click
Save
to save your settings.
Click
Calibrate
to ensure that the camera’s pan, tilt, zoom functions correctly.
Should the camera’s P/T/Z function incorrectly, or if the camera has been
jarred, you may need to click the
Calibrate
button.
When
On
is selected, the camera’s status LED will function normally. Select
Off
to disable the status LED. Disabling the LED function may be useful if
you want to make the camera less obvious.
Check the box to enable privacy control. Click
Privacy On
to put the camera
in
Privacy Mode
, and click
Save
. (When privacy mode is turned on, the
camera lens is hidden.)
