28
D-Link DCS-5029L User Manual
28
Section 4 - Configuration
Configuration
Using the Web Configuration Utility
After completing the Camera Setup Wizard, you are ready to use your camera. The camera’s built-in Web configuration utility
is designed to allow you to easily access and configure your DCS-5029L. There are two ways in which you can access your
camera’s Web configuration interface:
• Log in to your mydlink account, click on the
Settings
tab, and click on
Advanced Settings
(as shown on the previous page)
to access your camera’s Web configuration utility.
• You can also access the configuration utility locally by entering the IP address of your camera into a Web browser, such as
Internet Explorer. To log in, enter the
User name
admin
and the
Password
you created in the Setup Wizard. (If you did not
create a password, leave the password field blank.) After entering your password, click
OK
.
Note:
If you are directly connecting your camera to your PC, or if you are using the camera on a closed network, the default IP address
is
192.168.0.20
. If the camera is connected to a router or network, a different IP address may have been assigned.
DCS-5029L
