52
D-Link DCS-4802E User Manual
Section 3: Configuration
Enable Video
Motion:
Sensitivity:
Percentage:
Enable this to enable the motion detection feature of your camera.
Please note that you must create at least one motion detection box
for the camera to detect motion.
Set how sensitive motion detection will be from 0% to 100%. A low
sensitivity means that there must be large changes between two
images in order to detect motion, and a high sensitivity means that
even small changes will cause motion to be detected.
Low sensitivities may be useful when monitoring an area that has
flickering lights or a window to the outside in view. High sensitivities
may be useful when monitoring an area that rarely changes, such as
a storeroom or warehouse.
Set how much of the area being monitored for motion must change
for motion to be detected. A low percentage means that only part
of the area being monitored has to change to detect motion, and a
high percentage means that most of the area needs to change to
detect motion.
Low percentages can be useful when monitoring an area such as a
large room, and high percentages can be useful when you are only
monitoring a specific part of the camera's view, such as a doorway.
Motion detection enables the camera to monitor the video feed for movement. Here, you can adjust the sensitivity settings that
determine whether motion is detected by the camera or not. After making any changes, click the
Save
button to save your changes.
Motion Detection
